ERA Multipoint Locks & Gearboxes

ERA Multipoint Locks & Gearboxes Repairs & Replacement

You could have a worn ERA multipoint lock or gearbox — a common problem on uPVC and composite doors.

At The Key Locksmith, we specialise in ERA multipoint locks and gearboxes – diagnosing, repairing, and replacing mechanisms quickly and professionally.
Often, there’s no need for a whole new door.

📞 Call Gerry now: 07803 721 200
✅ 24/7 local locksmith | ✅ Same-day service | ✅ No call centres

What is an ERA multipoint lock?

ERA multipoint locks are fitted to millions of uPVC, composite, and aluminium doors across the UK.
They secure the door at several points along the edge — usually with:

• Hooks
• Rollers or mushrooms
• Deadbolts
• Central latch and deadbolt

These locking points are all controlled by a central gearbox.
When that gearbox wears out or fails, you’ll feel stiffness in the handle, grinding sounds, or find the key won’t turn at all.

Common ERA lock & gearbox problems

We fix all kinds of ERA issues, including:

• 🔧 Handle goes floppy or drops – internal spring or gearbox failure
• 🗝️ Key turns but lock won’t engage or release
• 🚪 Door won’t close or needs lifting to lock – misaligned hinges or keeps
• ❌ Lock jammed solid – handle won’t move, key won’t turn
• 🧊 Seasonal stiffness – door expands or contracts in heat or cold

If you spot any of these warning signs, don’t wait for it to fail completely — a simple repair now can prevent a full lockout later.

Our ERA multipoint lock services

1. ERA gearbox replacement

The most common repair — and usually the cheapest option.
We replace only the central gearbox, not the whole lock strip, saving you money and disruption.

• Genuine ERA or compatible gearboxes
• Like-for-like fit and smooth operation
• Quick turnaround — usually within an hour

2. Full ERA multipoint lock replacement

When the full strip or mechanism is damaged or obsolete, we can supply and fit a new ERA multipoint lock or a compatible high-security equivalent.

3. Alignment & adjustment

Many lock problems are due to door misalignment rather than lock failure.
We realign hinges, adjust keeps, and ensure smooth operation to extend the life of your ERA system.

4. Cylinder & handle upgrades

Upgrade your security while we’re on site:

• 3-Star TS007 anti-snap cylinders
• New or matching handles in chrome, brass, black, white, or satin
• Improved weather resistance and operation

Why choose The Key Locksmith?

• ✅ ERA multipoint lock & gearbox specialist
• ✅ Fast local response across Orpington & nearby areas
• ✅ Non-destructive entry where possible
• ✅ Honest, fixed pricing – no hidden extras
• ✅ Independent locksmith – you speak directly to Gerry
• ✅ 24/7 emergency call-out for lockouts and urgent repairs

📍 Covering Orpington, Petts Wood, Bromley, Chislehurst, Swanley, Sidcup and surrounding Kent areas.

Do I need a new door?

Usually not.
A failed ERA lock or gearbox rarely means the door itself is beyond repair.
We’ll:

1. Inspect your door, lock strip, and gearbox
2. Identify the exact cause of the problem
3. Offer a fixed-price repair or replacement
4. Restore full operation without damaging the door or frame

You’ll save hundreds compared to replacing the door.

Signs your ERA gearbox may be failing

• Handle feels stiff, loose, or grinds when lifting
• Door needs pushing or pulling to lock
• You must slam the door for it to catch
• Key turns halfway but won’t lock or unlock fully
• Handle spins freely without moving the lock

If you notice these early symptoms, contact us before the mechanism fails completely.

Our repair process

1. Call or message Gerry – explain the issue and, if possible, send a photo of the door edge.
2. Fast response – especially for emergency lockouts.
3. On-site diagnosis – we’ll identify your ERA model and fault.
4. Repair or replacement – most done in a single visit.
5. Test & tidy – we make sure your door locks smoothly and securely.

FAQs – ERA Multipoint Locks & Gearboxes

How do I know if my lock is an ERA?
Look down the metal strip on the edge of your door when open — you’ll often see “ERA” stamped or engraved. If unsure, send us a photo and we’ll confirm.

Can you replace just the ERA gearbox?
Yes. In most cases we replace only the central gearbox, which is the part that fails most often. It’s quicker and cheaper than changing the whole lock.

Do you carry ERA parts in stock?
Yes, we keep a range of ERA gearboxes and multipoint lock strips on the van for same-day repairs.

What if my ERA model is discontinued?
We can usually fit a compatible replacement gearbox or lock strip that works perfectly with your existing handles and cylinder.

Can you open a jammed ERA lock without damaging the door?
Yes. We use professional, non-destructive methods to open jammed ERA multipoint locks and then replace or repair the faulty part.

Do you fit anti-snap or high-security cylinders?
Absolutely. We recommend 3-Star TS007 anti-snap locks to upgrade your door’s security.

How long does a repair take?
Most ERA lock or gearbox repairs are completed within an hour.

Do you guarantee your work?
Yes. All repairs and replacements come with a 12-month guarantee on parts and labour.

Can you help if I’m locked out because of an ERA lock failure?
Yes — we offer a 24/7 emergency locksmith service in Orpington and nearby areas. Fast response, no damage entry, and on-the-spot repair.

Book your ERA lock repair today

Don’t let a stiff handle or jammed ERA lock turn into a full lockout.
A quick repair now can save you time, stress, and money.

📞 Call Gerry on 07803 721 200
or
📧 Send us a message to book your ERA multipoint lock or gearbox repair today.

The Key Locksmith –
Your trusted local locksmith in Orpington for ERA multipoint locks and gearboxes.
Fast, friendly and reliable – 24 hours a day.